The Cantieri Capelli Osia 315 requires a more articulated delivery verification than that of a normal open, because it combines outboard propulsion, fuel tank of about 1,000 liters, fishing facilities, local toilet and numerous utilities. The official card declares 9,55 meters long, 2,96 meters of berry, about 3.250 kg dry, fourteen people, maximum power of 600 hp and CE B certification. This guide translates data into practical checks without attributing unpublished performance.
Configuration card
| Voice | Official data | Control |
|---|---|---|
| Length | 9.55 m | documents and mooring |
| Baglio | 2,96 m | boat place |
| Height | 3,16 m | shelter and transport |
| Dry weight | about 3.250 kg | distinguish from operating weight |
| Persons | 14 | plate and documents |
| Maximum power | 600 hp | engines installed |
| Fuel | about 1,000 l | indicator and circuit |
| Certification | EC | file delivery |
The first step is to freeze the equipment purchased. The photos of the yard can include optional: take from dock, water heater, cabin refrigerator, bow sunbathing, additional doors and wireless lighthouse do not get confused with the standard. A signed inventory, accompanied by manuals and serial numbers, prevents technical control from being generic.
Propulsion and power limit
The expected drive is outboard and the declared limit is 600 hp. The official page does not indicate speed, consumption or compulsory motorization; these values should not be deducted. Models, freshmen, total power, weights, propellers, electronic controls and documentation occur. The engines must make the whole excursion without interfering with benches, plants or poppieri accessories. Also check locks, cable passages, fuel pipes and protection against rubbing.
Fuel tank
The standard tank is indicated in about 1,000 liters. The test must include vent, cap, vent, indicator, alarms available, filters and valves provided by the installation. Look for smells, piping and bent pipes. The nominal capacity is not equivalent to usable volume nor to autonomy: consumption, reserve, sea and cargo must be established with real data. It is useful to note the reading of the indicator during a progressive supply and receive the procedure of the yard.
Basic electrical system
The equipment includes 12 volt socket, nine courtesy lights, LED ceiling light in the cabin, adjustable cockpit lighting, radio, wiper and 800 W winch. Each user must be operated individually and then together, observing voltage falls and protections. Ask for schema, battery position, detachment, fuses and mass points. Legible labels and accessibility are as important as the operation at the time of delivery.
Optional platform
The 220V socket with charger is optional, such as the 220V water heater. If ordered, they must be verified with protected power: connection, polarity indication, charger, protection and cable fixing. The water heater is only tested after checking the correct filling of the circuit. If these elements do not appear in the order, they should not be claimed because they appear on a photographed specimen.
Fresh water and shower
The fresh water system and the double shower are standard. The card does not declare on the page consulted the capacity of the tank, so it is not correct to attribute a value. Fill the circuit, activate the pump, open the utilities and control fittings, noise, pressure and automatic shutdown. Inspect the shower compartment and check that the pipe fits without folds. Leaving the pressure system helps to detect slow losses.
Salt water washing
The salt water washing system is standard and is essential for cleaning the fishing area. Check sea grip, valves, pump, filter, pipe and jet. All maintenance items must be reached without any improper removal. During the test, make sure that water flows and does not reach electrical connections or dry rooms. Also ask for the procedure of rinsing and resting.
Live pool
The declared live tank is 160 liters, with light and pump of 32 liters per minute. The test includes filling, spare parts, lighting, lid seal and drainage. Observe the boat level and check that the fittings do not transfuse. The flow rate is a nominal data of the declared pump, not a measured measure on the specimen: any actual performance depends on the circuit and must be controlled in water.
Fish-box and macerators
Two 170 litre insulated fish-boxes each with a macerator are standard. Open covers, control seals, drains and internal finishing; then operate separately the macerators according to manual. It is important to identify protections and inspection points, because residues and scales require careful cleaning. Check that the exhaust does not affect and that the lids remain firm with the moving boat.
Mobile preparation
In the furniture are integrated sink, cutter, patter and refrigerator from 65 liters. Check fixings, hinges, sink drain, refrigerator ventilation and reachability of connections. Bringing the refrigerator at temperature takes time: testing cannot be limited to the light. Try the furniture with the bench and the steps used, ensuring that doors and drawers do not interfere with the activities in the cockpit.
Local toilets
The private room with sink, shower, toilet and septic tank is standard. Locate pumps, valves, vents and maintenance access. Try adduction, unloading, door and ventilation, controlling stagnations and sealing of fittings. Ask for specific operating capabilities and modes of the specimen, since the page does not provide all volumes. The emptying procedure must be explained and consistent with plant and use area.
Path and drainage
The complexity of the plants requires careful inspection of the bilge, although the official page does not list each pump. Locate low points, check cleanliness and accessibility, ask which devices are installed and try them according to the delivered configuration. Pour water only where authorized allows to observe the drainage of the well. No pipe should compress under lids or lean against unprotected edges.
Verricello and bow equipment
The 800 W electric winch with remote control and 10 kg is standard. Check fixing, direction of gear, command, protection, chain or top really provided and safety stop. The winch should not be the only element that retains the anchor during navigation. Try the opening of the rack and drainage, verifying that cables and connections remain protected by water and accessible for maintenance.
Steering and driving place
SeaStar tiltable hydraulic steering with steel steering wheel is standard. Turn off motors control game, end run, fittings and absence of losses; in water there is progressive response under the conditions provided by the test. compass, wiper, radio and windscreen must be legible and functional. Any additional electronics must be compared to the order, annoting transducers, maps, sensors and serial numbers.
Lighting and evening use
The nine courtesy lights, the adjustable light in the cockpit, the illumination of the tub and the cabin ceiling light must be tried in the dark or shielding the ambient light. Check uniformity, glare in the driving and sealing place of the luminaires. The wireless deep lighthouse is optional: if there is any need to recharge, control, fixing and secure storage. The standard lights of the specimen are controlled separately according to documentation.
Hard top and fishing accessories
The hard top in fiberglass and aluminum supports eight doors; four other steel doors are on the falchettes. Check locks, seals, vibrations and freedom of the barrels compared to antennas and people. Also inspect side rack, cabinet baits, pillow holder and cabin door. Four additional poppieri cases are optional and must appear in the inventory if purchased.
Cabin and refrigerator optional
The boat declares three beds and offers standard double bunk, pillow, porthole and LED light. Try closures, ventilation, lights, sockets and technical access. The 48-litre cabin refrigerator is optional, distinguished from the 65-litre cabin in the indoor furniture. If installed, it must be tested as a separate user, checking ventilation, absorption and locking of the door.
Functional test in water
The test does not serve to confirm speeds promised by the editor, because the source does not publish. It is used to control installed engines, steering, controls, tools, perceived trim, vibrations, abnormal noises and operation of the plants under agreed conditions. Note load, fuel, people, sea and instrumental data makes the test repeatable. After the return, the bilge reopens and compartments to look for loose leaks or components.
sequence of final document verifications
Before acceptance, declarations, manuals, CE B certification, plate, standard and optional inventory must be available, guarantees, motor and equipment quantities, electrical schematics and plant procedures. Check that length, glare, people and power are consistent with documents. Photographing technical compartments and valve position creates a useful base for future maintenance. Each anomaly must be described with responsibility and termination.
Also deliver an initial registry with engine hours, battery voltages, fuel level and completed tests. The document does not replace the manuals, but it makes traceable the status of the specimen at the time of the passage. The deadlines of the first cutting and the remittance operations must be reported according to the instructions of the manufacturers actually installed.
Configuration test
The Osia 315 offers a very complete official equipment for short fishing and cruise, but this wealth requires method. Live tub, two fish-boxes with macerator, washing, refrigerator, toilet, winch and large tank must be tried as connected systems, not as brochure entries. By separating standard, optional and undeclared data, the owner obtains a verifiable delivery and a reliable base for management and maintenance.
Control after the first hours
Delivery does not exhaust the verification. After the first hours of operation it is prudent to repeat the inspection of the accessible rooms, observing fittings, locks, filters, levels and fixing according to the received manuals. Any interventions must be carried out by the competent network, without improvising adjustments. Note date, engine hours and conditions helps to distinguish an initial settlement from a recurring defect. Also live tub, macerators, refrigerators, winch and pumps deserve a second test after real use and washing. The verification sequence thus becomes a management tool, not a document filed immediately after purchase.