PY Yacht PY100 XL: installations, configuration and controls on board

PY Yacht PY100 XL seen from above

The PY Yacht PY100 XL Hard Top requires a tracked technical configuration, because the official page combines standard equipment, customizations and an optional articulated list. The model measures 12,50 meters out of everything, has a homologation length of 9,95 meters, is 3,90 meters wide and declares 0.75 meters of fishing. This data identifies the platform; to manage and test a single unit, you must then know exactly what engines, tools, equipment and transformations have been installed.

The board allows up to three outboards and a maximum power of 1,200 hp, equal to 894 kW. It does not publish speed, consumption or autonomy and does not allow to obtain them from the only declared boat weight of 5,000 kilograms. This guide remains on the verifiable soil: separate, plants, accessibility, testing and registration of conditions. Each dynamic evaluation must refer to the real configuration, with sea, wind, load and levels of the noted tanks.

PY100 XL operational card

Parameter Official value Control over the unit
Length outside everything 12,50 m Measure with hangers and engines
Approval length 9.95 m Coherence with documents
Width 3,90 m Boat space
Fishing 0,75 m Data Load Condition
Boat weight 5,000 kg Inventory included in weight
Fuel 2 × 400 l Valves, vents and indicators
Water 200 l Autoclaves, pipes and utilities
Maximum power 1.200 hp / 894 kW Engines of the specific unit
Persons 16 Compulsory safety documentation and equipment
Category B Certification delivered
PY100 XL red navigation
Engines, propellers, government and instruments must coincide with the distinct.

Open the separate before testing

The first verification sequence is not carried out on board, but on documents. They compare order, distinct final, serial numbers, manuals and certificates. The generic words like “electronics”, “audio” or “kitchen” are not enough: they serve brand, model, power and position. The same applies to customization of cushions and colors. Only a separate lock allows you to understand if a component belongs to the standard, it was chosen as an option or is not expected. The delivery report must use the same names.

Engines: up to three does not mean three

The manufacturer declares the possibility to mount up to three outboards. The verification sequence must record actual quantities, brand, model, individual and overall power, weight, propellers, mounting height, tools and commands. The maximum threshold of 1,200 hp does not describe the display delivered. You control plates, wires, pipes, fixings, staging space and lifting possibilities. After static tests, a water verification records regimen, trim and alarms without proclaiming performance valid for different configurations.

Government and maneuver

The steering wheel and compass are among the standard equipment declared; the bow propeller appears among the optional. If present, its command, electrical protection, compartment and associated battery must appear in the scheme. The government's testing includes complete movement in both directions, lack of interference, response of controls and alarms. In the port you try the manoeuvre at controlled speed, annotating wind and load. The model does not attribute a behavior deduced by photographs or geometry alone.

Plancia and mobile kitchen of the PY100 XL
Kitchen, sink and refrigerator require separate testing.

Bridge, tools and visibility

The station protected by the Hard-Top integrates plexiglass windscreen, switch panel, built-in chain counter and external USB sockets in the published equipment. Navigator Garmin 9 or 12 inches, VHF and depth transducer are listed as optional. The verification sequence identifies what is really mounted and matches any fuse or switch user. With light displays, you can control obscuring, reflections, sitting and standing visuals, alarm readability and correct circuit break.

Hard-Top: structure and utilities

The Hard-Top protects the control area from sun and wind. Maintenance involves fixing, draining, cable passages and light accessibility. Junctions are inspected, any removable panels and every point where water or vibration could reach the wiring. The two 12 V stainless steel LED lights indicated in the standard are operated together with the base and navigation lights, checking controls and absorbments. A visual control must be repeated after the first exit.

PY100 XL stern dinette
Electric table, chairs and gavones are controlled in every position.

Dinettes of aft and electric table

The U dinette uses an electric table that, once lowered, connects to the deck floor and allows the sun configuration. The test must cover ascent, descent, arrests, stability, command and access to the actuator. It is controlled that pillows, covers of the gavones and people do not block the movement. The transformation is tested several times with the batteries in the normal onboard condition. The internal table, also declared, must be kept distinct in the separate and operating manual.

Kitchen cabinet and gas circuit

Behind the driving seat, the furniture collects gas stove, sink and worktop; the drawer refrigerator is included in the standard list. The gas verification identifies cylinder, reducer, taps, flexible, ventilation and closing procedure. There are no undeclared sensors. The second manual ignition is tested, then the stability of the pots and interferences are controlled with the passage. The sink and worktop are tested separately, observing unloading and stagnating.

Refrigerator and cold optional

The standard drawer refrigerator must be identified by model, power supply and protection. The page also offers a double drawer refrigerator as an option: if chosen, the electrical load and ventilation change and are to be shown in the scheme. The test checks closing during navigation, starting, reaching the temperature and access to cleaning. The plate data, not a commercial definition, determines absorption and maintenance procedure.

PY100 XL in lateral navigation
The test in water is only comparable if load and conditions are recorded.

Fuel: two 400 litre tanks

The declared capacity is 800 litres, obtained from two 400 litre tanks. The check sequence must clarify whether power and reading are separate, how valves and vents work and what volume can be used. Accessible fittings, sealing, labels and indications are inspected. After filling, odours, losses and consistency of indicators are checked. Autonomy is not the capacity for hypothetical consumption: it is calculated only with measured consumption and established reserve.

Freshwater and autoclave

The water tank is declared by 200 liters and the autoclave belongs to the standard. The utilities include at least sinks, aft shower and bathroom amenities. At tank filled the indicator occurs, then each water point is activated by observing pressure, pump cycle, discharges and losses. Filters, valves and emptying options must be identified. The boiler is optional: if present, it must have schematics, protections, exhaust and specific instructions, without being confused with the base circuit.

Sentry pumps and drainage

The equipment lists two bilge pumps. They locate physically, clean the intake points and try manual controls and automatisms actually installed. The exhaust path must be recognizable and free of rubbish. Gavoni, blanket and shower also require control of drainage with water, not only a dry inspection. The result is noted pump by pump: the presence of two units does not show that both are powered and free.

12 V electrical system

Electric panel, battery detachment, switch panel, lights and external USB are declared. The verification sequence builds a map between user, circuit and protection, checks accessible locks and measures the voltage in defined conditions. The 220 V battery charger, the 3 kW generator and the 6,000 BTU air conditioning are among the options: when present they introduce an alternating current part that requires schematic and dedicated procedures. No undocumented connection is presumed.

PY Yacht PY100 XL
The route to the bow must be checked with doors and tables in the positions of use.

Verricello, anchor and mooring

The published standard still includes, galvanized chain, 1000 W Smart Plus winch and cashed chain. An additional command of the bow winch is optional. The test checks fixings, joint between anchor and chain, direction of march, stop, reading of the chain counter and ability to operate safely. The four ordinary bits and the two retractables are also controlled, along with the retractable ladder and the stern shower. Every movement must remain free of furniture.

Lights, audio and communications

Navigation lights and back, two 12 V LED lights, sound and stereo indicator with four speakers are standard. Amenities, underwater lights, VHF and professional audio system are optional. The verification sequence avoids testing them as a single block: each circuit, command, function and absorption are controlled. For the VHF, if installed, apparatus, antenna, power supply and required documents occur. Audio should not cover alarms or operational communications.

Cover of the PY100 XL view from above
Cover and Hard-Top must be inspected together with wiring and fixing.

Cabin, porthole and transformations

The cabin includes shipowning door, sofa, convertible dinette, four side portholes, low-profile passman and LED lighting. The control starts from the accesses: doors, table and chairs must move without getting in the way. They try porthole and pass man with water, checking seals and drainage. Each transformation is carried out following the real sequence; therefore it is checked that bath, picture and storage are accessible. The internal USB sockets are optional, not standard.

Four or 4+1 beds

The official documentation has a divergence that must be kept visible. The general description speaks of accommodation up to four people; the list of the cabin equipment indicates “beds 4+1”. It is not possible to determine from the text which formulation applies to each specimen. Before ordering, planimetry, surface dimensions and written confirmation of the configuration purchased. In the test report, concrete transformation occurs, without inventing a fifth place or ignoring item 4+1.

Bathroom: user testing

The separate bathroom includes electric toilet, sink and shower. The WC is tested by checking the supply, adduction and route provided by the installed system; the sink and shower are operated by controlling flow and drainage. Door, ventilation and technical access complete inspection. The verification sequence records any actual pumps and valves, without supposing details that the page does not specify. After use, water is searched in adjacent rooms and the correct shutdown is confirmed.

PY100 XL seen from stern
Three outboards are a declared possibility, not mandatory configuration.

Optional changing plants

Among the published possibilities are antivigetative, custom colors, electric inflator, teak or synthetic coatings, additional lighting, plotter, VHF, bow propeller, boiler, double refrigerator, air conditioning and generator. They are not automatic equipment. Before accepting them, we evaluate each weight, absorption, space, cooling, accessibility and maintenance. Changes must be in the final drawings and in the electrical budget; a commercial list without location is not sufficient.

Test in water with repeatable data

The test begins by announcing engines, propellers, number of people, fuel, water, equipment, wind and sea state. They control starting, alarms, government response, vibrations and temperatures indicated by the instruments. Speed and consumption, if measured, are only valid for those conditions. On the return, there is a look, fixings and connections, pumps are used and the levels are compared. Without this background, a test number is not transferable to another configuration.

synthetic delivery controls

  • Compare order, separate, plates, manuals and certificates.
  • Record exact configuration of outboards and government.
  • Charging batteries, protections, framework and any electrical option.
  • Try separately fuel, water, gas and drains.
  • Test electric table, kitchen, refrigerator and accesses.
  • Testing winch, chain counter, pumps, lights and audio.
  • To clarify in writing the divergence on beds.
  • Repeat the technical inspection after the first exit.

Configuration assessment

The PY100 XL offers a platform with a transformable living poppiero, Hard-Top protection and full bathroom cabin. For the owner, the quality of the experience depends on the discipline with which standards, optionals and customizations are transformed into a verifiable distinction. Two fuel tanks, a water tank, two bilge pumps, kitchen and electric table create a sequence of concrete checks; motors and electronics depend on the order. The correctly delivered unit is the one where each official voice finds physical and documentary feedback, while performance and autonomy remain measured results, not early statements.

Automatic translation. For safety and legal information, the Italian original is authoritative. Italiano