The BAVARIA SR35 requires an orderly configuration because it concentrates in 11,40 meters outside all two engines, a transformable cockpit, wet bar, four beds declared and a separate cabin. The range includes hardtop and Open Top, a total of 540 to 710 horses and components that can change between the individual units. This sequence of verifications starts from the data published by the manufacturer and indicates what to identify on board. It does not assign models, materials, performance or autonomous undocumented: specifications, plates, patterns and handbooks of the delivered boat remain the final reference.
Create a unique configuration matrix
Before the order, a table with version, engines, transmissions, devices, circuits and fittings is built. Each row shows brand, pattern, quantity, power, location and status between standard, alternative and option. The document must have the same revision of the plan and the estimate. A subsequent variation records consequences on price, mass, absorption, maintenance and delivery date. This discipline avoids testing the boat against general photographs or descriptions and allows you to immediately recognize what is missing, what is different and what requires a new manual.
Hardtop or Open Top
The classic hardtop version and the Open Top with low windscreen change protection, ventilation, height and management of the closures. The verification sequence identifies exactly cover, mobile panels, seals, drains, obscurements and any handling systems. It proves the visibility from the driving place with people sitting, assemblies mounted and different light conditions. The locks must have storage seats and instructions for wind and storage. The choice should not be described as simple color or style: it changes the seasonal use of the entire bridge.
Measures to be reported in the operational sheet
The length out all with platform is 11,40 meters, hull 10,89, float 9,71 and bay 3,46. The height on the float is 3,13 meters without antenna. The unit is measured, the ledges and the height includes lights and antennas. The document serves for boat, alge, transport and passages under structures. Parabords and peaks require space beyond the nominal beam. Catalog sizes remain useful, but do not replace the relief of the boat ready to sail.
Technical data and associated controls
| Voice | Summary | Configuration verification |
|---|---|---|
| Length outside everything | 11,40 m with platform | Detect protrusions and accessories |
| Scafo / Floating | 10,89 / 9,71 m | Distinguish quotas |
| Baglio | 3,46 m | Confirm mooring and mooring |
| Height | 3,13 m without antenna | Measure the maximum point |
| Fishing | 0,70 / 0,86 m | Try your feet up and down |
| Engines | Double, 540–710 hp total | Read plates and reports |
| Fuel | about 500 L | Check circuit and useful volume |
| Water | about 240 L | Try pump, vent and indicator |
| Cabin / bathroom | 1 / 1 | Compare planimetry and units |
| Category CE | B8 / C10 | Check license plate and certificate |
Identifying the two engines
BAVARIA indicates two-year Volvo Penta or MerCruiser alternatives, with total power between 540 and 710 horses. The model installed should not be deducted from the power or logo visible in a photograph. Plates, serial numbers, year, power, nominal regime, warranty and maintenance deadlines are recorded. The verification includes cold start, synchronization, tools, alarms and stop of each engine. The differences between alternatives affect spare parts, diagnosis and support network, so they must be resolved before signing.
Transmissions, feet and propellers
The declared fishing is 0,70 meters with feet raised and 0,86 with feet lowered. The verification sequence identifies the model of the feet, ratio, propellers, anods, lubricant and lifting modes. You control threads, games, protections and control responses. The limits of use in different positions must come from the manuals installed. The status of appendices is photographed during the installation and any shocks or repairs are recorded. A dynamic test compares the two sides by regime, response and alarms, without attributing the cause of a difference before inspection.
Cooling, unloading and ventilation
The scheme of the single boat must show sea grips, valves, filters, cooling circuits, drains and ventilation of the engine compartment. All components must be accessible with the equipment provided. Valve manoeuvrability, cleaning of filters, absence of leaks and proper alarm behaviour. Temperatures and pressures are recorded within the limits of manuals. The general pages do not publish diameters or materials, so no detail is invented. Maintenance starts from the traceability of the system actually installed.
Fuel tank of about 500 liters
The nominal capacity is about 500 liters. To configure the circuit you can identify reservoir, vent, vent, interceptions, feeds, returns when required, filters and indicators. A controlled filling allows to compare quantity input and reading, observing smells or drawings. Valves should be labeled and accessible. The autonomy does not coincide with the volume: it requires consumption measured on the real boat, known conditions and a defined reserve. The fuel mass must also be recorded in the loading plan and in the tests.
Fresh water of about 240 liters
The water circuit starts from the tank declared by about 240 litres and follows vent, vent, pump, accumulation, any treatments and utilities. Filling, indicator, pressurization and drainage are tested, checking leaks in accessible compartments. Outside sink, inner kitchen, bathroom and shower can be used in sequence to observe pump flow and repair. Nominal capacity and usable volume are not equivalent. Clean the tank and replace the components follow a calendar consistent with the manuals and with the stop periods.
Wet bar: plate, refrigerator and sink
The description of the bridge includes a cooking plate, a refrigerator and a sink in the wet bar. The capitulate must specify models, feeds and protections of the ordered configuration. Ventilation, fixing, drainage, taps and door blocks are controlled. The test uses every user under the conditions allowed, recording absorptions and verifying that contemporary use does not exceed the available budget. Pots and tools require secure locations. The outdoor kitchen is functional only if the use does not occupy the passage between rudder, table and platform.
Electric balance and batteries
Battery capacity, voltages and charging systems are not published in the pages considered. They must be purchased from the boat dossier. The verification sequence lists engines, services, refrigerator, plate, pumps, lighting, tools and other appliances, distinguishing peaks and contemporary use. Batteries, protections, drives, battery chargers and actual dock connections are recorded. The tests include switching, alarms and voltage falls within the limits provided. No electrical autonomy must be declared without measured absorption and usable capacity documented.
Driving and tools
The seat, steering wheel, levers, engine panels, displays, switches and visibility. Each tool is associated with sensor, power and manual. They experience readability in the sun and at night, adjustments, alarms and consistency of data. The hardtop or Open Top version can change protection and reflections. With six people in the cockpit the driver must reach the controls without interference. A large screen does not demonstrate the calibration of sensors: depth, route, speed and levels require separate controls.
Pozzetto transformations
The lower backrest of the sunbed allows you to arrange seats around the table for a maximum declared of six people. The lowerable table that contributes to the sea area is indicated as optional. The verification sequence records components, stops, hinges, load limits and storage locations. Each configuration is mounted and disassembled during testing, verifying that no piece remains free in navigation. Steps, access to the driving place and opening of the gavones must remain practicable. A useful mechanism is what the crew can use without improvising.
Platform, ladder and safety stern
The integrated platform enters the declared length. They control anti-slip, drains, ladder, hooks and relationship with feet and propellers. The bathing procedure must indicate the condition of the engines and prevent incompatible start-ups with people in water. In the dock you try the access with tops and parabords in place. Any holders or accessories must have mass and fixings allowed by documents. The poppiera area is also a technical area: ease of access should not hide the risks associated with propulsion.
Four beds and transformation up to six
The interior declares four beds between cabin and lounge; lowering the dinette table you can create a further accommodation to reach six. Try every trim, controlling supports, cushions, ventilation and passageways. The removed components must have a seat. The number of bunks does not coincide with CE capacity or comfort for several nights: water, storage and privacy remain decisive. The contract plan must show the transformation and technical volumes that cannot be occupied by luggage.
Cabin in the center of the boat and boots
The separate cabin in the centre of the boat includes a bed declared from 2,00 for 1,60 meters and a sofa. The control measures the usable surface, access, height and ventilation. Doors, drawers and panels must have effective stops and allow inspection of technical rooms. The opening of the exits and the position of lights and sockets without assuming unlisted equipment. Bags and heavy objects require safe hold; they must not be supported in front of valves, pumps or connections to be quickly achieved.
Bathroom with separate shower
The bathroom is described with separate shower and independent sink. The check sequence follows adduction, exhaust, pumps, ventilation, sea sockets and real boat valves. Try the shower by observing drainage, stagnations and sealing of separations. The health circuit and any collections must be identified in the relevant schemes, without deducting capacity or materials. Valves must have labels and free access. Maintenance is sustainable when siphons, pumps and connections can be inspected without permanently disassembling the furniture.
CE category and equipment for people
The board indicates category B for eight people and C for ten. Plate, certificate and manual must confirm the given of the specific unit. The verification sequence does not use the maximum as a goal: check seats, vests, hooks, storage, load and navigation program. Six beds, eight people in B or ten in C are numbers related to different functions. The commander establishes the operating limit according to conditions, experience and equipment. Each security equipment is invented by model, expiry and position.
Testing in dock and dynamic test
Static testing covers roof version, transformations, wet bar, water, electricity, bathroom, openings, drainage and equipment. The dynamic test starts with load and recorded levels and checks separately the two engines, feet, controls, tools and alarms. Regimes, speed, consumption, temperatures, noise and response are noted without anticipating the result. In the end they compare capitulates, serial numbers, manuals, certificates and guarantees. Each difformity remains open until correction and new evidence documented by SOL in the private dossier.