The BR 65 Hair requires a careful reading because it combines a bow rider blanket, an outboard up to 200 hp and equipment that change significantly between standard and optional. The official card indicates 6.50 meters, 2,57 meters of glare, ten people and about 1.060 kg dry. It does not publish speed or consumption: the verification sequence must therefore focus on identifiable components, documents, functional tests and configuration of the specimen.
Tested data sheet
| Control | Official data |
|---|---|
| Length outside everything | 6,50 m |
| Maximum | 2.57 m |
| Max tubular | 0.52 m |
| Persons | 10 |
| Dry weight | about 1.060 kg |
| Maximum power | 200 hp |
| Propulsion | outboard |
| Category CE | C |
| Fuel tank | about 220 l, standard |
| Tubes | Neoprene-Hypalon Orca 1670 dtex |
The “approximate” values must remain such in the contract until manual, plates or separate units provide no more precise feedback. Operating weight includes engine, fuel, batteries, water, accessories and load. The range of ten persons should be read with the CE documentation of the specimen and does not replace the evaluation of sessions, claws, individual devices and distribution of the masses.
First verification: separate standard and optional
The verification sequence starts from two signed columns. The standard includes automatic bilge pump, compass, electric frame, Flexiteek on longherons and bow steps, fuel tank, prodier roller, electric inflating pump, integrated poppiera platform, lights, straight wiper, ladder, teak table and windscreen. Everything else should be identified as an optional or added component, with brand, model, serial and installation responsibility.
Electric panel and protection
The electrical picture is standard, but the page does not describe batteries, capacity, detachment or schematic. It is therefore necessary to open accesses, identify sources and protections, check labels and ask for the scheme of the unit. Each circuit must be tested individually and under load when appropriate. Cablings, terminals and passages must be ordered and protected. The absence of official battery data prevents you from estimating electrical autonomy without measurements and components actually installed.
Automatic bilge pump
The list is not enough: accessibility, cleaning of the area, fixing, pipe and exhaust point are controlled. The automatic operation must be tested with a safe procedure, separate from the manual command. Water returns, anomalous noises and fittings are observed. After the exit, reopen the compartment to check any inputs. The location must allow maintenance and replacement without having to remove unrelated furniture or installations.
Fuel tank of about 220 liters
The standard tank is declared in about 220 liters. The verification sequence looks for plate, material, year, vent, vent, indicator, pipes and filters on the specimen, without deducing them from the single page. Odours, rubbish, ties and accesses are inspected. Autonomy requires really usable volume, measured consumption and reserve; it should not be calculated by a speed or consumption not published. The calibration of the indicator must also be progressively verified.
Outboard and maximum configuration
The official maximum power is 200 hp, but the actual engine must be identified by model, weight, serial, year and maintenance. Mounting, bolting, passages, cables, pipes and freedom of wiring and trim. The choice of the propeller must be documented. During a test, load, fuel, conditions and regime are recorded; any speed and consumption belong to that configuration. The maximum limit is not an automatic recommendation or performance test.
Hydraulic steering: optional to confirm
The board places the hydraulic steering between the optional. If installed, they identify cylinder, pump, tubes and fluid, checking losses, games and route of lines. The steering wheel must move regularly from a line with a motor in the planned positions. If the unit adopts a different system, it should be described without calling it hydraulic by analogy. The contract must connect the government and motor system really chosen, including manuals and periodic controls.
Windscreen and wiper
Straight windscreen and wiper are standard; the left one is optional. Try the swept with wet surface, controlling rubber, arm, fixing, wiring and command. The view occurs from sitting and standing, with people in the bow and with possible mounted bimini. Reflective and upright can change perception. The sink is not listed and should not be given by present. Each second wiper must appear explicitly in the separate.
Navigation lights and compass
Both are standard equipment. The lights must be lit one by one, observing intensity, fixings and sectors without attributing only to the fact that they are illuminated. The compass is controlled by legibility, stability and possible interference of the added instrumentation. Radio, telephones, loudspeakers and cabling can influence the environment. The position of each device installed after delivery should be evaluated together with the console, not as an isolated intervention.
Electric Inflator Pump
The electric pump is standard. It is located socket or connection, you control pipe, adapters and storage, so it is tested according to the manufacturer's instructions. It should not replace manual control of valves and tubular. Pressure and temperature should be noted together, avoiding aggressive corrections on fabric heated by the sun. A periodic comparison in the same conditions helps to distinguish thermal variations from losses. Adapters must remain accessible and secure.
Orca pipes 1670 dtex
Cantieri Capelli declares Neoprene-Hypalon Orca 1670 dtex and maximum diameter of 0.52 meters. The inspection runs through valves, joints, barrels, cones, abrasions and repairs. Differences in color or pressure require feedback, not immediate conclusions. Repairs must have date and documented material. The maximum diameter does not describe the internal space: passages, seats and technical accesses should be measured with the boat set up and the usual crew on board.
Optional refrigerator approx. 16 liters
If chosen, the refrigerator should be identified and tried long enough to observe cooling and absorption. The board indicates about 16 liters, without specifying the model. We control ventilation, fixing, closing, wiring, fuse and opening with sitting people. The energy balance depends on actual batteries and usage times. A cold compartment photographed does not prove that the refrigerator is included or that its feeding is suitable for configuration.
Optional shower of about 45 liters
The shower is available with about 45 liters. You need to locate tank, vent, vent, pump, pipes, control and delivery point. The plant fills according to instructions and puts itself under pressure by controlling spontaneous leaks and alerts. There is also the emptying by storage and drainage of the use area. Nominal capacity and usable volume should not be confused; the data of the unit must be documented.
Radio and console integration
The radio is optional and the page does not indicate brand or model. In the quote must appear units, antenna, speakers, protection and position. Power, controls and connection quality are tested, observing whether the installation hinders compass, visibility or access to the picture. Holes and steps must be protected. Any connectivity functions belong to the mounted product, not to the BR 65 in general. Manuals and serials must be delivered together with the boat.
Adjustable stainless steel
The bimini with folding stainless steel structure is optional. It should be mounted and folded to check height, shadow, tensioning, clamping and storage seat. Vibration, windscreen, passage and visual interference are observed during the test. The folded position should not block a ladder or technical access. The poppiera cover and the integral sheet are separate options: each requires inventory, fixings, instructions and drainage control during storage.
Palo sci e zona poppiera
The ski pole is optional. If present, they examine base, counterflange, locks, alignment and compatibility declared with activity and motor. It should not be deducted from the sole presence of the support. The built-in poppiera platform and the ladder are standard: they try out with raised and lowered outboard, checking the lift path and hooks. The poppiero sunbathing kit should not hide fixtures or make the bath area impractical.
Flexiteek: standard and optional areas
The coating on the longherons and on the bow step is standard; that on cockpit and stern platform is optional. The distinct must appoint areas, avoiding generic formulas. You control borders, joints, adhesion, drains and accesses below. A finish should not cover inspections or hide screws. Photographing the status at delivery facilitates comparison over time. Cleaning and maintenance follow the product instructions actually installed.
Additional cushions and transformations
The additional sun cushions and the poppiero kit are optional. Mounting allows you to check supports, stability, sequence, panel weight and storage location. Steps, security devices and essential access must remain available in the extended configuration. Every piece is numbered in the record. Promotional photographs show possible setups, but contractual control must start from the list delivered, not from the visual impression of the exposed boat.
Test in recorded water
Before leaving there are engine, propeller, people, fuel, water, accessories, sea and wind. Starting, alarms, government, visibility, response and vibrations, without trying to transform a single output into model certification. Electrical utilities are activated according to safety. On the return they inspect the bilge, fittings, fixings and tubular. Any speed or consumption measures report instrument, regime and conditions, subject to the specimen.
delivery controls
The final record lists CE documents, plates, serials, keys, motor, propeller, picture, compass, lights, bilge, inflating pump, wipers, reservoir, table, pillows, ladder and every option. Each anomaly receives description, photography and correction term. Manuals and guarantees are collected. On the new one compares the order; on the used one add invoices, motor maintenance, repairs of the tubular and modifications. No voice is left to memory.
Coordinated maintenance plan
The plan combines outboard, government, tubular, batteries, bilge and accessories. After remittance, pressure, valves, charge, cabling, fuel, drains and covers are controlled. Refrigerator and shower require cleaning and emptying; wipers and bimini controls of the mobile components. Dates, hours and spare parts must be recorded. The accessibility of the plants is therefore a criterion of purchase: what can be inspected easily is also maintained with greater regularity.
Recommended configuration by the user program
The BR 65 can prefer family outputs, stops or dynamic activities, but it does not need to install every option. Shadow, water and cold increase comfort and electric load; the sunscreens change the steps; the ski pole imposes specific checks. The correct configuration retains storage margin, technical access and a legible distinction. The final judgment arises from documented evidence and consistency of the whole, not from unpublished performance or the amount of accessories.