The Tempest 40 Hair requires a precise configuration before testing. The maxi rib measures 12.90 meters, is 3.54 meters wide and accepts outboard propulsion up to 850 hp. Standard and optional affect covers, energy, water and deck organization: for this reason the verification must refer to the ordered specimen, without transferring performance or equipment from other models of the range.
Tempest 40 control card
| Voice | Summary |
|---|---|
| Length outside everything | 12,90 m |
| Maximum width | 3.54 m |
| Persons admitted | 18 |
| Dry mass | about 3,900 kg |
| Maximum power | 850 hp |
| Propulsion | outboard |
| Category CE | B |
| Sleeps | 2 |
| Project | Navaldesign |
Free the distinct exemplar
The first operation is to separate what is understood by what has been chosen. Engines, cover, coating, table and utilities must appear in a separate signed. Incompatibilities have the same importance as the additions: hard tops and soft tops require the removal of the standard A-frame, while the hard top needs the seat indicated by the yard. Manuals, schemes and guarantees complete the delivery file.
Propulsion within the limit of 850 hp
The 850 hp are the maximum permitted power, not a prescribed motorization. Brand, number of outboards, propellers and commands must be read in the unit documents. Speed and consumption are not deducted from the power alone. In the dock are controlled fixings, wiring and pipes; with bandwidth-oriented engines there is no interference with planks or other components.
Hydraulic steering aid
Hydraulic rudder with servo assistance is standard. Cylinders, fittings and pipes are inspected before the test, looking for piping and rubbing. The race must be regular and consistent with the instructions of the plant. After dynamic testing, the available rooms are reopened to control any losses. Fluid, drainage and maintenance intervals are those prescribed by the component manufacturer actually installed.
Driving and command station
The slider with the sink is included, while the board does not set the brand and size of each display. The delivery must therefore mention tools, switches, handcuffs and alarms present. Labels and functions must coincide. The pilot checks visual, accessibility and support without leaving the government. The two stainless handles for consoles are optional and are not available with the soft top: the choice must be resolved in the order.
Fuel: about 650 liters declared
The standard fuel tank is indicated in about 650 liters. The delivery is characterized by a vent, vent, level reading and access, without attributing unpublished materials. Odours and seal occur after controlled supply. Nominal capacity is not equivalent to autonomy: route, load, conditions and regime require margin. Initial level and observed consumption should be recorded for the real specimen.
Continuous current batteries and distribution
The page does not declare the number and capacity of the batteries. The technician must identify them on the unit, together with switches, fuses, connections and utilities served. Engines, servo assistance, winch, refrigerator, lights and audio require an updated scheme. Fixings, terminal protection and label matching are checked. Electrical measurements are carried out according to component procedures, avoiding unsupported universal values.
Reload from optional dock
The 220 V connection charger is an optional. If ordered, sockets, cable, protections, loaders and serviced counters are identified; connection and disconnection follow the manual. If it does not appear in the distinct, it is not assumed a net of dock only because a photograph shows a grip or because other specimens mount it. The presence must be confirmed physically and in the documents.
800 W Electric Verricello
The 800 W electric winch is standard. The controlled test checks command, stop and recover a portion of the line while keeping the bow zone free. Gavone and drainage must remain accessible also with the whipped cuscineria. Model and electrical protection of the apparatus are recorded. During the stop the load is managed according to the instructions, without entrusting any effort to the only winch.
Freshwater and indoor shower
The indoor shower has a declared reserve of about 140 liters. The control starts from the filling and continues with pump, dispenser, fittings and drainage. After use, the rooms are accessible to detect losses. The volume does not allow to promise a duration, which depends on consumption. Cleaning, prolonged stop and seasonal protection follow the instructions of the installed components.
Private toilet and septic tank
WC and sink in the private room are standard, such as the septic tank. The check sequence identifies valves, controls, adductions, discharges and actual maintenance access. The operation is tried without confusing the presence of the sink with an undeclared internal shower. The owner must explain the procedures for use and emptying. After testing, odours, drawings and correct valve reset are checked.
Water heat from about 25 liters
The water heater from about 25 liters is optional. If present, the verification identifies power supply, pipes, valves and start mode before applying current. You search for every loss during heating and cooling, respecting the time of the manufacturer. His absence is not a defect when it was not ordered. The distinction must also clarify which points of use receive hot water on the specimen.
Drawer refrigerator approx. 95 liters
The 95 litre drawer refrigerator is standard. We control power supply, closing during movement, ventilation and full opening without hindering the passage. The cooling must be evaluated according to the manual and in the recorded conditions, not only by the noise of the compressor. Cables and protections must appear in the scheme. The content is distributed so as not to hinder guides and locks.
Amenities and underwater lighting
LED courtesy lights are included; a pair of underwater lights on the mirror is optional. The circuits are tested separately and associated with the respective switches. If underwater lights are installed, steps occur and held under the conditions provided by the manufacturer, avoiding improper ignitions. Any subsequent enlargement must update the scheme, protections and budget of users.
Radio with four speakers
The standard system includes radio and four speakers. The test tests ignition, command and operation of each moderate volume zone. Audio should not cover alerts and communication during maneuvers. Model, fuse and links are recorded on the specimen, because the page does not detail each component. Any changes of the shipowner enter the electrical distribution and should not reduce accessibility or protection.
A-frame, hard top and soft top
The A-frame in fiberglass is standard. Hard top and soft top are alternatives that require removal; for the hard top it is also necessary the seat specified by the yard. The delivery must verify that the structure, seat and fixing correspond to the configuration purchased. The two solutions should not be treated as overlapping accessories. Height, coverage and storage change, as well as accesses for periodic control.
Beams and covers
The optionals include the bimini for the pot on the A-frame, the one for the poppiero sun and a bimini for T-top supported by two carbon poles. Dedicated covers are also provided. The verification sequence identifies each sheet, attack and storage bag. Opening and closing are carried out without persons in the joints; limits and conditions of use are those shown in the manuals, not those desunti from the appearance.
Fixed table and retractable table
The fixed double table in teak is standard. The optional alternative is a retractable table in teak, electrically operated and equipped with a pillow to turn the area into a sunbathing. Order must establish replacement. If installed, try running, end running, stability and procedure provided without power. People and objects stay away from the movement and the table is blocked before navigation.
Plancette, gavone and service ladder
The stern plank kit is standard; the service ladder for the large gavone is optional. They control fixings, support surface, freedom of outboards and lifts from the sea. The large gavone must open without bumping components and maintain reachable drainage and equipment. Peaks and parabords are insured, avoiding the load prevents inspection or moves during navigation.
Elica of bow and maneuver
The tunnel for the bow propeller is indicated as standard, while the apparatus should be confirmed in the separate exemplar. If installed, command, power and protection are identified, then short impulses comply with the manual, observing response and alarms. The device assists the maneuver but does not replace the planning, wind, current and communication of the crew. The absence of the apparatus is not judged by the presence of the tunnel alone.
Mass, people and load distribution
The approximately 3,900 kg are a dry mass. Outboard, 650 liters of fuel, 140 liters of water, optional, equipment, people and luggage define a different condition. The declared limit of 18 people is not a goal for each exit. During testing levels and load are noted; heavy materials are fixed without obstructing valves, batteries, pumps or accesses. Comparisons are only valid under documented conditions.
Test in four steps
Dry documents, identification, tubular, blanket and fixations occur. In the dock there are rudder, paintings, water, toilet, refrigerator, winch, audio and accessories ordered. At sea there are conditions, load, regimes, response of commands and alarms of the real configuration. Upon return, rooms and fittings are inspected again. Each anomaly is corrected and tested before acceptance.
check sequence before exit
The commander controls weather, documents, fuel with margin, water level, batteries, bilge, rudder, engines, lights and fixation of equipment. Check the status and pressure of the tubulars according to manual, leave the steps free and assign the homework tasks. Tables, cushions and covers are ensured. The reliable management of Tempest 40 comes from a clear distinction, updated patterns and repeatable controls, not from presumed performance.