Configuring a PY Yacht PY10.0 Cabin means turning a construction board into a documented boat apparatus for apparatus. The model measures 10.80 meters above all and 3.60 meters wide; the homologation length is 9,95 meters, the boat weight declared 4.000 kilograms and the maximum capacity fourteen people in category B. On board they coexist external kitchen, electric table, cabin with 2+1 beds and toilets. The following verification sequence distinguishes standard, optional and data that must be verified on the specimen, without attributing unpublished performance.
First rule: freeze the ordered configuration
The yard allows you to customize famine, blanket, tubular and upholstery and has cockpit with roll-bar or T-top. The verification starts then from the separate signed, not from the photographs. Brand, model, quantity, location, power supply and standard or optional status are recorded for each row. Attach dashboard designs, shell pattern and color samples. A subsequent variation is approved and dated. This step avoids looking on board ever ordered devices and allows you to recognize a replacement before it becomes a problem of assistance.
Identification data and delivery table
| Control | Value declared | Highlight required |
|---|---|---|
| Out | 10,80 m | full unit measurement |
| Approval | 9.95 m | documents and tags |
| Width | 3,60 m | relief for mooring |
| Fishing | 0,70 m | noted load condition |
| Boat weight | 4,000 kg | ready to use mass |
| Fuel tank | 475 l | scheme, vent and indicator |
| Water tank | 130 l | scheme and utilities |
| Maximum power | 700 hp / 514 kW | approved installation |
| Persons | 14 | plate and equipment |
| Category | B | documentation of the unit |
Weight, liquids and test condition
The 4,000 kilograms are defined as boat weight, but the page does not list all components in the same item. Before moving or testing the unit, the ready mass is detected, annotating engines, batteries, people, equipment and levels. Fuel and water can occupy up to 475 and 130 liters respectively; their standard indicators must be compared with known quantities. Each navigation result shows these values. In this way, differences of order or autonomy are not generally attributed to the boat when they depend on different configurations and loads.
Propulsion: documents before the start
The board set at 700 hp, i.e. 514 kW, the maximum power, but does not assign speed, consumption, number or model of the engines. The verification sequence requires approval of the yard, serials, mass, stem, propellers, commands, instrumentation and manuals. Fixings, cabling, piping, rudder and freedom of movement are controlled. Before the test there are propellers and levels; during conditions and conditions. The maximum value is not used as a recommended power and does not replace the limits on the specimen documents.
Driving and control panel
The published equipment includes steering wheel, high speed compass, plexiglass windshield, external switch panel, water and fuel indicators and seat with lumbar support. The technician photographs the dashboard, labels every command and checks that the position matches the scheme. Garmin GPS, VHF and transducer are optional: if present they must appear in separate, have manual and identified protection. They control visibility, ignition, backlight and readability, without inventing functions that the individual apparatus does not document.
Electric panel, batteries and drive
Electric system and detachment board are standard. The delivery physically locates picture, dissecter, protections and accesses, then checks the correspondence with the scheme. It is recorded which utilities remain fed in the different positions provided and only what the manufacturer of the apparatus allows. The 12 volt battery charger is optional, as well as 3 kW generator and 6,000 BTU air conditioning. If selected, they require additional documentation, ventilation, discharges and separate tests; they are not given by present.
Sentry pumps and alarms available
The standard list contains two bilge pumps. The verification sequence locates pumps, anglers, pipes, drains, fuses and accessible controls. Each unit is activated with the planned procedure and the stated result. The page does not publish or describe associated sensors or alarms, so these data should be read on installed equipment and not obtained by analogy. Access and cleaning must be compatible with storing. After each intervention the test is repeated and the maintenance register is updated.
Fresh water, autoclaves and showers
The circuit starts from the declared tank of 130 liters and feeds autoclave, external washbasin, poppiera shower and internal services. For each user it is proved to be dispensing and closing, visible losses are sought and valves and accesses are identified. Level indicator and vent are compared with the pattern. A front shower in the compartment is still listed among the optional and should not be confused with that standard poppiera. The boiler is also a variant: if present, it must have specific power supply and instructions.
External kitchen: gas, water and cold
The central furniture includes sink with faucet, drawer refrigerator and gas cooker. In the description, the sink and the fires are integrated in stainless steel, with a steel refrigerator at the bottom. The verification identifies appliances and tags, tests separately water and refrigerator and follows the manual for the stove. Interceptions, ventilation and feeding housing must be shown by the delivery person. The gas vitroceramic floor is optional: its presence changes the separate line.
Electric table and transformation of the well
In the cockpit with a C sofa, the fold-out electric table can create a convivivial plan or compete on the sun. The verification sequence frees the area, performs a complete cycle, observes command, running and stability in the planned positions, then verifys access to maintenance. No object must interfere with movement. It is noted the behaviour with batteries in the delivery state and the manual of the actuator is kept. The emergency mode is reported only if required by the installed documentation.
Gavoni, doors and storage plan
PY Yacht declares three wide ranges with assisted opening and gas pistons on the doors. The control opens each compartment, identifies hinges, assistance, drainage and surfaces, then assigns a code. Heavy objects are recorded with position; peaks and parabordes must not block pumps, squares or valves. Any coating of the pot in teak or synthetic, proposed as an optional, should not cover inspections. After loading the equipment it repeats the opening of all the doors in the different configurations of table and kitchen.
Cabin, beds and ventilation
The standard cabin is declared with complete kitchen, LED lights and 2+1 beds. The description defines a bed for two people and a convertible sofa, as well as a porthole and wardrobe. The verification transforms the sofa, has the previewed kitchen and controls entrances and openings without attributing unpublished measures. Lights and locks are tested and technical access is localized. The internal USB sockets are optional, such as the air conditioning: the presence must be confirmed by separate, panel and real equipment.
Toilets, Electric WC and internal shower
The standard cabin configuration includes internal toilets with electric toilet, sink and shower. The description adds mirror, storage drawers, shower plate and crystal sink. The test tests the supply of the toilet according to manual, adduction, tap, drainage and accessible surfaces. Valve diagram and instructions are required for operation and remittance. It does not deduce the path of the discharges or the presence of unnamed components: each element is identified on the boat and inserted in the file.
Anchor, winch and bow area
Still with galvanized chain and 1000 W Smart Plus winch appear among standard equipment. At the bow there is fastening, storing, available command, chain passage and access to maintenance. An additional prodier command and the chain count are optional; they must therefore have separate rows. The sunbathing and the front sofa with a drink holder must not prevent the necessary access. The test follows the instructions of the winch and does not turn the nominal power into an undeclared shooting capacity.
Plancette, stair and poppiera shower
The side planks to the engines define the seaside area. Stainless steel staircase and outdoor shower aft are standard; a second ladder and sea lift handles instead appear among the options. Before delivery, the on-board ladder opens and, in the safe conditions provided, it is possible to reach it from the water. Fixings, surfaces and freedom are controlled compared to propellers. The shower is tested together with the water circuit, while passages and corrugated should not hinder the movement between the sides.
Lights, trumpet, stereo and sockets
The standard list includes navigation lights, 360 degree base light in stainless steel, pair of LED lights, recessed trumpet, stereo with two speakers and external USB sockets. Each user is accessed by its command, located on the picture and associated with the available protection. courtesy lights, underwater and gavones, as well as the enhanced audio system, are optional. The test must therefore follow the signed configuration, avoiding to mark as anomaly the absence of an unordered accessory or as a standard an element seen in photography.
Roll-bar, T-top and covers
Roll-bar with awning is included among the standard equipment; the T-top is among the optional. The chosen configuration is documented with photographs, fixings and real height. They control opening of the curtain, interference with lights and steps, voltage of the provided supports and storage modes. Console sheet, dashboard and seat cover are separate accessories. Before moving or remittaering the unit, you need to know the encumbrance of the actual structure, because the 10.80 meters in length and the 3.60 in width do not describe each volume alone.
Functional test and acceptance criteria
The final test does not seek a generic impression. Check one line at a time: approved propulsion, government, indicators, pumps, lights, winch, table, refrigerator, autoclaves, showers, kitchen, toilet, ladder and optional equipment. For each item the outcome, condition, observation and responsibility are marked. Sea, wind, load and levels accompany each dynamic relief. Since the card does not declare speed or consumption, any measures are valid only for that specimen under those conditions and do not become promises of the model.
Seasonal register and track maintenance
After delivery, the file collects manuals, schematics, serials, photographs and minutes. Before each season you repeat controls on batteries, pumps, lights, winch, rudder, tubular, doors, water circuit, toilet and ladder. Each change reports mass, location, protection and installer. The capacity of fourteen people is read with tag, category B, load and equipment, without considering it an automatic configuration for each output. A consistent log makes verifications comparable and prevents that optional, interventions and propulsion changes remain outside the technical history of the PY10.0 Cabin.