The PY Yacht PY100 test starts from ten official data and arrives at the timely verification of the specimen. The inflatable measures 12,50 meters out everything and 3,90 meters wide, with approved length declared at 9,95 meters, boat weight of 4,500 kilograms, maximum power 900 hp and capacity sixteen people in category B. Two fuel tanks of 350 liters, 200 liters of water, outdoor kitchen, cabin and bathroom require a coordinated testing. Speed and consumption are not published and are not invented.
Signed distinction before any control
The PY100 is proposed in AIR variant or with T-top and can receive many accessories. The first operating document is therefore the distinct: for each row it indicates standard, optional, brand, model, quantity, position and power. Pictures and color codes complete the order, but do not replace it. Roll-bar, T-top, electric table, electronics and comfort equipment must appear explicitly if chosen. Each variant during construction is dated and approved, so the test compares the boat delivered with a stable configuration.
Identification card and measures
| Voice | Value declared | Delivery evidence |
|---|---|---|
| Out | 12,50 m | full size |
| Approval | 9.95 m | documents and tags |
| Width | 3,90 m | relief for mooring |
| Fishing | 0,98 m | load condition |
| Boat weight | 4,500 kg | mass ready |
| Fuel | 2 × 350 l | circuits and indicators |
| Water | 200 l | scheme and utilities |
| Maximum power | 900 hp / 671 kW | approved engines |
| Persons | 16 | plate and load |
| Category | B | file of the unit |
Repeatable Load Condition
The weight of 4,500 kilograms is defined as boat weight, without complete detail of the components in the same item. To compare tests and maintenance, the ready-to-use mass is recorded, including engines, batteries, liquids, people and equipment. The level of the two fuel tanks and 200 litres of water is noted before each dynamic relief. Also the declared fishing of 0,98 meters is associated with the actual condition and the position of the outboard. A measure without this frame is not transferable to another configuration.
Motors, propellers and government
The limit of 900 hp, equal to 671 kW, does not specify number, brand or size of the engines. The verification sequence requires approval of the yard, serials, mass, stem, propellers, rudder, commands and instrumentation. Fixings, pipes, cabling and motor racing occur, so the configuration is kept in the minutes. During the test there are regime, load, wind and sea. Since the source does not declare speed or consumption, each measured data is reported to that unit and does not become a universal performance of the model.
Dashboard and readability of commands
Flyer, high speed compass, plexiglass windscreen, switch panel and water and fuel indicators are standard. The technician photographs the dashboard, identifies each command and checks the correspondence with the scheme. Garmin GPS, VHF and transducer are optional: if installed they must have manuals, protections and serials. Visibility, backlight and reachability are controlled by the driving position. No display is considered present only because it appears in the official images of a different display.
Two fuel tanks, one register
The capacity is indicated as two 350 litre tanks. The verification locates vents, vents, indicators, filters, pipes, valves and inspection points really available. The page does not clarify whether and how the circuits communicate, so the behavior is read from the diagrams of the specimen. Each supply notes quantity and indications before and after. The 700 liters do not define autonomy or reserve: they depend on the usable volume and the measured consumption of the chosen propulsion in documented conditions.
Freshwater and autoclave
The declared water tank is 200 liters. Autoclave, external washbasin, double shower, kitchen and interior services are tested one at a time, looking for visible losses and identifying valves and accesses. The standard indicator compares to known levels. Front shower in the compartment and boiler are optional and should not be marked as missing if not ordered. At the end the emptying or remittance procedure provided by the manufacturer, without inventing paths not represented in the scheme.
Aft kitchen and refrigerator under sitting
In the poppiera area the description places kitchen and refrigerator integrated under the sitting. The series includes a gas top, a sink with a faucet and a drawer refrigerator. The test identifies plates, tests water and cold separately and follows the manual for cooking. Interceptions, ventilation and access to connections must be shown. Double drawer refrigerator and gas glass top are alternatives for a fee: their presence changes different and absorbent, not only the appearance of the furniture.
Electric panel and four switches
Electrical panel, switch panel and four detachment units appear among the standards. Delivery locates protections, batteries, switches and accesses, so check the utilities in the planned configurations. The 220 V battery charger is optional, as a 3 kW generator and air conditioning from 6,000 BTU. If present, these systems require schema, ventilation, drains, manuals and dedicated tests. A load table shows voltage, power and priority of each device without assuming undocumented capacity.
Sentry pumps and accessibility
The bilge pumps are two. The control detects pumps, anglers, discharges, fuses and controls, verifying the activation according to the instructions. The source does not publish flow rates, sensors or alarms; these data should be read on installed equipment. Gavones and objects must not block access. After each intervention the test is repeated and date, component and responsible are noted. The record clearly distinguishes a pump working from a test of capacity that has not been performed.
Prodiero table and lounge transformation
The description mentions a folding table and the possibility to create a lounge area; the optional list contains a table with an electric base. Before testing, the separate must solve this difference and describe the mechanism installed. You run the entire scheduled race, controlling command, stability, interference and maintenance access. Bearings and removed components must have a storage place. The transformation must not hinder the cabin door or the side steps.
Automatic cabin door with two pistons
Undercover access is prodier and takes place through an automatic sliding door; two electric pistons lift door are standard. The complete opening and closing test sequence, controls, arrests and technical accesses, following system indications. Any manual procedure is recorded only if documented. The door is tested with table, chairs and bow tent in the respective positions. No object must enter the path of movement or prevent the expected exit.
Two-meter cabin and convertible beds
The source declares 2,00 meters of undercover height and two single beds convertible into a double. Complete internal cushioning and LED lights are standard, while prolonged and bed cushion appear among the options. The verification measures the height in the useful points, performs the transformation and controls supports and storing. Four side doors are declared standard and are opened and closed. The internal USB sockets, if ordered, try without confusing them with the external ones already included.
Separate bathroom and electric toilet
The separate bathroom includes electric toilet, sink and shower. The technician identifies power supply, valves, taps, drains and accesses, requiring schematics and remittance instructions. Users are tested without attributing unmarked capacity or exhaust mode. If the optional boiler is present, hot water and protections enter a distinct test. Ventilation, cleaning and closures are controlled on the specimen; the existence of the premises is not enough to declare its circuits tested.
Still, winch and bitten
Still with galvanized chain, 1000 W Smart Plus winch, two fold-down bits and four normal bits are standard. The verification sequence locates fixations, protection, controls, chain passage and accesses. Prodiero and Contacatena additional control are optional, so they must match the order. The tops are tested in the planned routes without interfering with tubular, seat or covers. The nominal power of the winch is not converted into operational capacity without documentation.
Lights, trumpet and audio system
The series includes navigation lights, 360-degree backlight, recessed trumpet, stereo with four external speakers and USB sockets. Each user is operated, associated with his/her command and backed to the available protection. Lights in the gavones, courtesy in the cockpit and underwater are optional; also the audio pro system with amplifier and subwoofer is separated. The test follows the distinct and does not consider standard what appears only in a photographed specimen.
Tendalini, AIR, roll-bar and T-top
Back Tent and Arabic bow tent are standard. The yard offers AIR or T-top variant, while roll-bar in fiberglass and T-top appear in the optional list. The report identifies the actual structure, measures the footprint and controls fixings, opening of covers, lights and steps. Console, dashboard and seat covers are distinct accessories. Before crane or storage, the operator uses the size of the configured boat and not only 12.50 for 3.90 meters of the board.
Staircase, plank and outdoor shower
The retractable ladder and the double shower are standard. They control fixings, opening from the water, freedom from motors and passage surfaces, with off drives and safe procedure. Sea lift handles and second ladder are options. The shower is tested with autoclave and water indicator. The bathing area remains free from tops, covers and objects that can prevent the use of access or motor controls.
Final and Seasonal Verbal Testing
The test runs through a fixed sequence: identification, motors, government, indicators, tanks, pumps, lights, anchor, kitchen, cabin door, beds, bathroom, covers and lifts. For each item indicates outcome, condition and observation. The capacity of 16 people is read with category B, tag, load and equipment, not as automatic configuration. The file contains schematics, serials, photographs and manuals; each future modification contains mass, position, power and installer. So the PY100 checks remain repeatable season after season.