The PY Yacht PY80 requires a light delivery as a system: outboard up to 350 hp, 220 liters of fuel, 80 liters of water, electrical system, autoclave, bilge, stove and a configurable console compartment. The official page distinguishes a wide standard range from numerous options, but does not specify all the characteristics of the individual components. The following verification sequence avoids turning business names into presumed performance and binds every control to the boat actually set up.
Identify the specimen before testing
The record begins with number of hulls, tags, documents and separate signed. The model and serial of the outboard, commands, propeller, rudder, batteries and electronics are reported. The standard and optional voices are checked separately, because a predisposition is not equivalent to a mounted apparatus. Photos with internal technical data document dashboard, gavones and accesses. No verification is closed using only promotional images or a configuration other than that delivered.
Declared dimensions and limits
The board is 8.05 meters long, 3,10 wide and 0.45 meters fishing. These odds must be compared with the complete footprint, including motors and accessories. The boat weight is indicated in 1,200 kilograms, without a complete distinction of the elements included. The scope is twelve people and category B. Charge, distribution and conditions remain bound to the tag and documents of the single unit, not to generic interpretations.
Delivery Verification Table
| Voice | Official data | Practical check |
|---|---|---|
| Length | 8,05 m | measure with motor and accessories |
| Width | 3,10 m | clutter and useful steps |
| Fishing | 0,45 m | load and foot position |
| Boat weight | 1.200 kg | ready to use weighing |
| Fuel | 220 | plate, vent, line and filter |
| Water | 80 l | tank, autoclave and utilities |
| Maximum power | 350 hp / 260 kW | approved engine and assembly |
| Persons | 12 | load, hooks and equipment |
| Category | B | feedback on documents |
The table organizes testing and does not replace manuals or tags.
Maximum outboard from 350 hp
The maximum declared power is 350 hp or 260 kW. The page does not publish maximum mass of the propeller, length of the stem, propeller or recommended power. Before acceptance, plate, bolts, seals, mounting height, pipes, wiring and freedom of wiring are controlled. The engine manual must match the serial. Speed and consumption are measured only with load and recorded conditions, without deducting them from power.
Commands, steering and arrest
Steering wheel, switch panel and compass are among the standards; hydraulic steering is listed as optional. The actual configuration must therefore be explicit. Complete running without impurities, absence of leaks, fixing of pipes and response of controls. Accelerator and inverter work with regular progression. The engine stop system is tested according to the manual, and the respect key is delivered and recorded.
220 litre fuel tank
The declared capacity is 220 liters. The test detects vent, cap, vent, tank, socket, filter and pipe towards the engine. Abrasions, rubbish, odors, and non-exploitable points are sought. The fuel indicator is standard and is compared to different levels without attributing an undeclared accuracy. The capacity does not automatically produce autonomy: measured configuration consumption, defined reserve and usage conditions are required.
80 litre water circuit
The water tank is 80 liters; autoclave, basin with tap and outside shower aft are standard. It fills the circuit, it is observed the start of the pump and it happens that, at closed utilities, do not continue to cycle. Joints, pipes, drains and tank compartment must remain dry. The additional shower in the toilet room is optional and should not be confused with the poppiera. Cleaning and remittance follow the instructions of the installed components.
Electrical and detachable system
Electrical system, panel and detachment are included in the declared equipment. The delivery identifies the number, type and capacity of the actual batteries, protections, sections of the cables and mass connections. Each circuit must have a legible label and consistent protection. The detachment is tested under the conditions provided, avoiding disconnecting systems that must remain powered. Protected clamps, stopped cables and absence of abnormal heats complete control.
Optional dock charger
The 220 V battery charger system is one of the optional. If installed, schema, manual and loader data must be delivered, along with the characteristics of the dock input and protections. The presence of sockets or other unlisted loads is not presumed. The test is performed by competent personnel verifying polarity, protection and charging status. Cable, connectors and insulation modes receive a dedicated place and procedure.
Sentry pump and drainage
The immersion bilge pump is standard. They locate pump, suction, sent and discharge, then try to start with water under controlled conditions. The verification sequence records whether there is an automatism and how it is protected, without deducting it from the sole name of the pump. Passages must remain free from tops and bags. Pozzetto, gavones and console compartment are inspected after testing circuits to detect infiltrations or stagnations.
Lights, trumpet and visibility
Navigation lights, 360 degree backlight and recessed trumpet are standard. Each function is controlled separately from the panel and associated with its protection. They control fixings and free field, especially in the presence of awning, roll-bar or T-top. The compass should not be disturbed by additional devices without a verification. The courtesy lights and underwater lights are optional and should be identified as separate circuits.
Gas hob and sink
The gas cooker is included in the standard equipment. The board does not detail cylinder, regulator, ventilation or closing system, so these elements must be verified on the unit and managed according to applicable documentation and regulations. The test controls fixing, sealing and separation from sensitive materials with qualified personnel. The sink is tested together with the water circuit and the drain. No component is used before clearing procedure and ventilation.
Console compartment, dressing room and toilet
The opening console can work as a dressing room or be adapted to local toilet. The electric toilet and the additional shower are optional: the minutes therefore indicate the installation really ordered. If present, power supply, adduction, discharge and accessibility are tried, annotating actual tanks or valves without inventing the configuration. The compartment must have lighting and ventilation adapted to the intended use and maintain the components behind the dash.
C sofa, table and sunbathing
The double sofa at C and the convertible table define the social area. Each transformation is performed during delivery: supports, base, cushions, closures and storing of the removed elements. The electric base table is optional, so it does not confuse with the standard solution. Sunset configuration should not cover technical access, hinder the ladder or leave free objects. Seats and hooks are verified with the usual number of use.
Staircase, shower and lift
The retractable ladder and the poppiera shower are standard, while lift handles and a ladder indicated as extra appear among the optional. The separate must clarify the delivered solution. The test controls opening, blocking, depth of the steps and I appease once it emerged. The engine remains in the safe condition. Shower hose, cushions and accessories should not invade the path, and the closed ladder does not leave free protrusions.
Electronics and optional accessories
5 or 7 inch GPS, VHF, transducer, stereo, advanced audio system, refrigerator, winch, chain meters and bow propeller are listed as optional. Brand, model, serial, location, protection and manual are recorded for each. The overall electrical load is compared with actual batteries and charging. An added command of the psalm still does not prove alone the presence of the entire system; each part must be tested and associated with the distinct.
Water testing without invented results
The test records people, liquids, wind, sea, motor, propeller and regime. Starting, cooling, steering, triggers, trim, vibrations and alarms are observed. The yard describes the hull as soft and suitable for different navigations, but the verification sequence does not convert this formula into numbers. Speed and consumption enter the minutes only if measured with known instruments and conditions. A result of the individual specimen does not become promise for different configurations.
Closure of minutes and maintenance
The minutes remain open until each anomalous has responsibility and deadline. You attach patterns, manuals, photographs, serials, spare parts list and remittance procedures. Tanks, autoclaves, bilge, gas, batteries, charger, motor, winch and accessories receive consistent intervals with their respective manufacturers. The PY80 is accepted when documents and boat coincide, all ordered functions have been tested and no missing data has been replaced by a hypothesis.
Test under service load
After the single tests, only the users allowed by the configuration are activated together, observing tension, protection and behaviour of the pumps. Control is not used to create an artificial overload, but to discover voltage falls, false contacts or interference between devices that do not emerge. Autoclaves, lights, electronics and optional refrigerators are associated with the real picture. Any heating, smell or unpacked intervention of a protection interrupts the test and generates a technical verification before acceptance.
Register of consumables and spare parts
Fuel filters, fuses, impellers, water circuit products and parts of the bilge pump must be identified with consistent codes to the delivered components. The escort is not composed by visual resemblance. In the register there are positions, quantities, deadlines and conditions of conservation, along with the necessary tools and limits of interventions carried out by the crew. This inventory makes the PY80 easier to manage and prevents a non-compliant replacement from being used during an emergency or a maintenance required remains suspended due to lack of the correct component.